state switcher造句

• Test method 24 solid state switch transfer tests
  试验方法24 ：固体开关转换试验
• Development on the 10kv solid - state switch
  绝缘栅双极型晶体管固体开关的研制
• Research on igbt solid state switch
  绝缘栅双极晶体管固体开关技术研究
• Experiment on mosfet solid state switch
  的固体开关技术实验研究
• Application of saber ' s simulation model igbt1 in solid - state switch design
  1在固态开关设计中的应用
• Solid state switches ; dimensions , ratings , requirements , tests , type a
  固态开关.尺寸额定值要求检验. a型
• Solid state switches ; definitions , climatic test categories , measuring methods and testing procedures
  固态开关.定义气候试验类型测量方法和测试程序
• Besides data acquisition , the driver software is responsibility for the boards fault diagnose and state switching
  驱动程序除了完成数据的采集，还负责板卡的故障诊断、状态切换等。
• The result indicated that the state switch of total reflux and total withdraw by controlling double - temperature in dynamic accumulation process was completely feasible
  结果表明，用塔顶和塔中温度控制动态累积全回流全采出的状态切换是完全可行的。
• The relays may lack the high speed switching characteristic of the solid - state state switches used by other preamplifiers , but they also have none semiconductor distortions and noise which accompany analog gates and voltage controlled amplifiers
  与其他前级放大器所用的半导体开关相比，这些继电器缺少高速转换的特性，但它们没有随着模拟开关和电压控制放大器所带来的半导体失真和噪声。
• Traditional executable languages suiting to the von - neumann architecture are characterized by the state switching of the automatic machine , the command - driven mode , and the dynamic syntax . but the rule based language suiting to this pre and post assertion model has a static syntax
  传统的适应冯?诺依曼机器体系可执行语言的特征即表示自动机的状态转换机制，其方式是命令式的，其语义是动态的；而适于这种模型的规范语言，其语义则是静态的。
• At the same time , the method of disposal phase shift of ct by compensation is introduced . then the analysis and statistic of electrical power quality , the control scheme and compensating amount of capacitor for reactive power compensation are analyzed respectively . and in the paper , the control with a / y and the switch with ac contactor and solid state switch is valid measure not only for improving operate level economically and amending electrical power quality but also for avoiding of replacing switch frequently and decrease economic loss
  然后对现有的算法进行了详细的分析、比较，筛选出既能满足硬件要求又可降低投资、保证精度、简化软件的方案，确定了准同步采样的方案，并通过对准同步采样误差的分析，提出了一种从45开始采样，从而提高精度的采样数据处理办法，同时，对于电流互感器相位漂移提出了一种补偿办法，接着对装置中电能质量分析与统计以及无功补偿中电容器的补偿量、投切原则也作了相应分析，其中对于无功补偿采用y混合接线，并利用交流接触器和固态开关共同投切电容，不但提高了经济运行水平、改善了电能质量，而且有效的避免了频繁更换开关，减少了经济损失；最后，设计了装置的硬件电路并绘制了相应的软件流程图。
• Based on the investigation with several voltage control methods , such as venturini method , instantaneous double - voltage synthesis method and space vector modulation method ( svm ) , three new control strategies are put forward . firstly , a time - varying modulation coefficient svm method is proposed to improve mc ' s anti - disturbance performance under the asymmetry input voltage . secondly , a 5 - state switching strategy is presented for mc controlled by the svm method , which reduces the commutation number and switching losses remarkably
  在分析了venturini控制法、瞬时双电压法、空间矢量法等电压控制方法的基础上，提出了在非对称输入条件下矩阵变换器空间矢量法的时变调制比改进控制策略，提高了变换器的抗干扰性能；对空间矢量法的开关策略进行了研究，提出了新型5状态开关策略，在保证其他性能不受影响的条件下，减少了变换器的换流次数和开关损耗；提出了一种矩阵变换器单电压合成的新方法，它不仅使得变换器的控制简单，计算量减少，而且使得开关损耗达到最少。
• A noval optics measurement device , the master control computer in the photoelectric theodolite , has become the commanding and controlling center system , which can complete data communication with many transducers internally and externally do with the guidance equipment , such as the center computer . and it needs to real - time complete data acquisition , data fusion , digital guidance , state switching , state controlling and function testing , all of which can be completed for the dominance of the real - time multitasking windows nt operation system
  随着武器装备的不断发展，对靶场测量设备也提出了更高的要求，新型光学测量设备?光电经纬仪的主控计算机系统已成为指挥控制的中心系统，它对内与若干传感器进行数据通讯，对外与中心计算机等引导设备进行数据通讯，它实时进行着数据采集、数据融合、数字引导、状态切换、状态控制和功能检测。
• Based on the advantage of the solid - switch , many fcls with solid - state switch have been proposed . fcl with series compensation which could limit the fault current and also make compensation is more flexible and practical when compared to the others . in this paper , a type of fault current limiter with series compensation is studied
  基于此，研究者提出了各种不同拓扑结构的采用固态开关的故障限流器，其中，带串联补偿的故障限流器，既具有串联补偿的功能，又能根据短路的实际情况改变限流程度，因而具有较大的灵活性和实用性。